Category Archives: Uncategorized

Ride-On Mowers: Battery Power Takes the Lead 

Ride-On Mowers: Battery Power Takes the Lead 

The latest generation of battery-powered ride-on mowers from Greenworks is redefining what electric lawn care can deliver— super performance while cutting noise, emissions and maintenance.

Battery technology has reached a tipping point in outdoor power equipment, and nowhere is that more evident than in the range of 60V and 82V ride-on and zero-turn mowers from Greenworks.

Designed for everyone from suburban homeowners to full-time landscapers, these machines combine high blade tip speeds, long runtimes and smart drive systems to deliver fast, consistent cuts without the fumes, vibration or downtime of petrol engines.

Across the range, the message is clear: electric mowing is no longer a compromise. With ultra-high torque brushless motors, fast charging, interchangeable battery ecosystems and productivity-focused design, these machines are powered by innovation—not petrol—and built to meet the demands of modern lawn care. A look at some of what’s on offer:

60V 30” Ride-On Mower

The 30″ CRT30 ride-on mower harnesses the power of innovation with 30” battery powered mini ride-on mower. It is compact enough to fit through most garden gates, even with the catcher attached.

With a speedy cutting rate of 9.6km/h, and up to 17,000 FPM blade speed – you’ll breeze through your lawn care tasks in no time. The advanced battery technology enables you to cover up to 1 acre on a single charge, while the 30″ deck ensures efficient coverage.

You can say goodbye to the limitations of petrol-powered mowers and embrace the future of lawn care with this high performance, eco-friendly solution.

Features:

  • High torque brushless CycloneCut Technology – providing blade speeds of up to 17,000 FPM
  • 3-in-1 mower – includes side throw, mulch kit, rear catcher and rear discharge chute
  • Cut up to 1 acre on a single charge
  • Unit includes 2 x 60V 4.0Ah batteries, 2 x 60V 8.0Ah batteries and 1 x 1.5kW onboard charger
  • Expand your runtime – Add the 20.0Ah suitcase battery as an optional accessory for even longer mowing time.
  • Speeds of up to 9.6km/h
  • Compact design – fits through standard 900mm gates.
  • Batteries compatible with the entire 60V range

60V Gen 1.5 42” Ride-On Mower

The future is here with the versatile, easy to operate CRT426 42” ride-on mower, a perfect option if you are looking to maintain a larger lawn. The CRT426 has the manoeuvrability of a zero-turn mower but with steering wheel control, powered by six (6) state-of-the-art, removable 60V 8.0Ah lithium batteries. Charging takes 60 minutes with the onboard charging system – powered by a 1.5kW wall mount charger, giving you the ability to mow up to 2 acres. The batteries are also fully compatible with the entire Greenworks 60V range.

The CRT426 has a top speed of 12.8km/h allowing you to work effectively and efficiently. Features such as multiple drive speed and blade speed settings, interactive LCD Display, high back seat and rear storage tray – this mower elevates mowing to a whole new level. Drop the decibels and emissions to levels that keep everyone happy.

60V Gen 1.5 42” Zero-Turn Mower

Whether you’re a keen domestic gardener, landowner or small commercial operator, the CRZ426 42” zero-turn mower is ready to work.

With the ability to manoeuvre on the spot, you’ll be able to navigate your way around garden obstacles, such as shrubs, trees and garden beds with ease. The CRZ426 has a top speed of 12.8km/h allowing you to work effectively and efficiently. Features such as multiple drive speed and blade speed settings, interactive LCD Display, high back seat and rear storage tray – this mower takes the hard work out of yard work.

The CRZ426 is powered by six (6) state-of-the-art, removable 60V 8.0Ah lithium-ion batteries, giving you the ability to mow up to 2 acres and charges in 60 minutes with the onboard charging system – powered by a 1.5kW wall mount charger.

60V 54” MaximusZ Zero-Turn Mower

It’s time to elevate your garden game and seize the throne of your street’s lawn care superiority with the industry’s best : the Greenworks 60V MaximusZ 54” zero-turn mower.

Revolutionise the way you conquer your lawn and unleash absolute power and performance as you effortlessly mow up to 3 acres (dependant on operator use and grass load) on a single charge, whilst experiencing the power of our CycloneCut Technology – intelligently designed to maintain a constant 17,000 FPM blade tip speed through any cutting conditions.

Boasting a petrol-powered equivalent 31hp – you’ll be cutting faster and working smarter with less maintenance, downtime, vibration and zero fumes.

The MaximusZ is equipped to do more than just mow – it is the only zero-turn mower in the market to feature an integrated dump tray which can take up to 90kg loads. It can also tow up to 135kg with ease.

Features:

  • Includes 2 x 4.0Ah, 2 x 8.0Ah and 2 x 20.0Ah suitcase batteries
  • Wall mounted 1.5kW charger – charge all batteries in 2 hours
  • 54” cutting diameter – powered by 3 CycloneCut high torque brushless motors
  • Comfortable ride –  suspension seat as standard
  • 14 position height adjustment
  • Hydraulic assisted dump tray – industry first
  • ROPs as standard
  • Mow anywhere from 2 – 3 acres on one charge

82V 32” OptimusZ Stand-On Zero-Turn 8kWh Mower

Engineered for all day commercial use, landscapers can now confidently mow up to 7 acres and enjoy 5 hours of runtime thanks to the highly efficient, built-in 8kWh battery module with safe LFP cell technology. Two industry firsts – ultra low-profile hub drive brushless motors (5kW output power each), planetary gearing and intelligent, interconnected systems provide users with unmatched driving performance, capabilities and comfort.

This ultra-high performance mower operates with the equivalent 22hp and 352cc displacement petrol engine. It is equipped with the most advanced 19k Constant Smart Cutting System and patented PowrTraq Smart Drive System. These systems make OptimusZ the best on the market.

With exceptional traction control, improved handling, intelligent design and the lowest centre of gravity in the class, OptimusZ can take on sloped applications – up to 15° degrees. Instant, optimised responses to changing conditions apply power when needed, allowing users to maintain peak driving performance and comfort on various terrain type, inclines/declines and conditions such as tall, thick and wet grass. This gives the user a superior versatility and allows more work to be done efficiently and safely. With a cut speed up to 16km/h – the fastest in its class, you can increase productivity, allowing users to complete tasks quickly, cutting more in less time than the competition.

With a constant 19,000 FPM blade tip speed, these machines skilfully adjust to various grass conditions and ensures exceptional quality of cut. These superior direct drive features, innovative design and intelligent responses to changing conditions help make the OptimusZ stand-on the most agile and most powerful zero-turn mower on the market.

OptimusZ also boasts the only real time 4G+GPS connectivity in its category, enabling fleet management via the unit’s software and the Greenworks Commercial app anytime, from anywhere. This connectivity provides instant visibility to usage statistics and gives live insights into battery status and all the system functions. Also, the 4G module enables over-the-air (OTA) software updates to guarantee your machine always has the latest and greatest software without ever having to step foot in a dealership or repair shop.

82V 72” Gen II 72” OptimusZ ZERO-TURN 36KWH MOWER

The 72” OptimusZ rear discharge zero-turn is the ultimate productivity machine. Engineered for all day commercial use, the built-in battery module with safe LFP cell technology, allows a massive 28 acres and 8 hours runtime for MAXIMUM efficiency. Quiet operation and high intensity, 360° LED lighting opens the door for earlier starts, longer working hours, more business opportunities and increased profitability.

3 x 3.0kW deck motors with SmartCut Technology provide a constant 19,000 FPM blade tip speed, enabling these machines to skilfully adjust to various grass conditions to ensure the best cut quality and the high speeds allow users to complete tasks quickly and cut more in less time, while maintaining a premium quality of cut regardless of grass conditions.

Rear discharge capability on this mower offers increased productivity in tall grass conditions, coupled with safer grass discharge, which is important for mowing conditions when in close proximity to people and property, such as roadside mowing and parks.

It is built like a tank – featuring a fabricated 7 gauge steel deck – with electric deck lift – available in 0.5”(12.7mm) increments from 1” (25mm) cut to 5” (127mm)

The intelligent 3-in-1 blade controller provides instant, optimised responses to changing conditions, allowing the blade motors to maintain consistent blade speed and prevent bog down commonly found in petrol and under powered electric motors.

The state-of-the-art traction control system delivers instant, optimised responses to changing conditions intelligently apply power when needed, allowing user to maintain peak driving performance and comfort on various terrain types, inclines/declines and conditions such as tall, thick and wet grass. Maintaining performance and riding comfort on any terrain reduces user fatigue and enhances the overall experience. The use of hub motors and planetary gearboxes allows for the entire drive system to be placed outside of the frame. This optimisation maximises the space between the frame, ensuring the internal layout of the machines are as efficient as possible and giving the OptimusZ range the lowest centre of gravity in the industry.

Built for the Australian Summer: Keeping Lawns and Gardens Looking Their Best

Built for the Australian Summer: Keeping Lawns and Gardens Looking Their Best

Australian summers place unique demands on lawns, gardens, and the equipment used to maintain them. Rapid growth after summer rain, extended dry spells, coastal humidity and intense heat all make summer the most challenging — and busiest — time for garden maintenance.

With the right approach and reliable outdoor power equipment, however, summer is also when outdoor spaces can look their best.

Understanding Summer Growth

Warm temperatures and longer daylight hours drive strong lawn growth across much of Australia. After storms, grass can quickly become thick and uneven, while dry conditions place stress on turf that is cut too short or at the wrong time of day.

Consistent maintenance is key. Regular mowing helps keep lawns healthy, improves airflow, and prevents grass from becoming stressed during heatwaves.

The Best Time to Mow in Summer

Timing is one of the most important factors in summer lawn care. The ideal mowing window is early in the morning or later in the afternoon, when temperatures are lower and grass is dry.

Avoid mowing during peak heat, which can scorch turf and place unnecessary strain on both lawns and equipment. Mowing during the right conditions encourages cleaner cuts and supports healthier regrowth throughout the season.

Keeping Lawns Fresh with the Right Mower

With summer growth at its peak, a dependable mower becomes the foundation of lawn care. The new STIHL 3 Series mower range is well suited to regular summer mowing, offering consistent performance and ease of use for homeowners looking to maintain a neat, healthy lawn.

Designed and tested for Australian conditions, the 3 Series by STIHL supports frequent mowing schedules without overcomplicating the task. A clean, even cut helps lawns retain moisture, recover faster, and stay greener during warmer months — particularly when mowing is done at the correct height.

Summer Lawn Care Beyond Mowing

While mowing is essential, summer maintenance rarely stops there. Edges grow faster, garden beds become unruly after rain, and fallen leaves or clippings can block sunlight if left unattended.

A complete summer toolkit often includes:
Line trimmers to keep edges clean and controlled
Brushcutters for heavier growth and tougher areas
Blowers to quickly clear debris and clippings
Together, these tools help maintain a tidy, healthy outdoor space even during peak growing periods.

Built for Tough Conditions

Summer is the most demanding season for outdoor power equipment. Dust, longer run times and higher temperatures all test machines and operators alike.

Quality equipment designed for durability and reliability makes a noticeable difference during this time.  Regular maintenance, such as keeping air filters clean and blades sharp, also ensures tools perform at their best when workloads increase.

Choosing the Right Power Source

Many gardeners reassess their equipment needs in summer. Battery-powered tools are increasingly popular for their low noise and convenience, while petrol-powered options remain ideal for larger blocks and extended use.

With a range of battery and petrol solutions available, STIHL allows users to choose equipment that best suits their property and summer workload.

Enjoying Summer Outdoors

Summer is when Australian gardens are meant to be enjoyed. With a consistent maintenance routine and the right outdoor power equipment, lawns and landscapes can remain healthy, functional and visually appealing throughout the season.

By using tools designed for Australian conditions, gardeners can spend less time managing overgrowth — and more time enjoying their outdoor spaces.

Why Australia Still Refuses to Drought-Proof Itself

Why Australia Still Refuses to Drought-Proof Itself

The Hoover Dam serves water for millions of people.
Image supplied.
The Hoover Dam serves water for millions of people. Image supplied.
Warwick Lorenz

Warwick Lorenz, Managing Director of Australian Pump Industries, argues that Australia’s greatest vulnerability is not climate, but a lack of political will to secure water for its future. In this feature, he asks why a nation of vast land, engineering capability and ambition continues to ignore the nation-building power of dams and irrigation.

‘We love a sunburnt country’ – the famous line from Dorothea Mackellar’s iconic Australian poem, My Country, celebrating the harsh beauty and climatic extremes of Australia is still something that resonates today. The poem talks about the ‘droughts and flooding rains’ that hit the country on a regular basis, and we all know about the threat of bushfires.

At Australian Pump Industries, we work hard to produce the best lightweight, portable fire pump that’s recognised around the world. But the summer of 2025 is looking pretty grim already.

OUR PERILOUS STATE

Most people in Australia realise they are sitting on a three million square mile island continent. That’s roughly the same size of the United States. They have around 360 million people, maybe more. We have around 27 million.

Go one step further and you will find that 65% of the population of Australia live in four cities, Sydney, Melbourne, Brisbane and Perth. 85% of us live within 40-50 kilometres of the coast. In other words, we are sitting on an opportunity to develop a country that could, based on irrigation and water security, accommodate 100 million people easily.

Would that give us more sense of security? Most people believe so. We realise we simply don’t have enough people to defend this wonderful country. Thank God for our American friends.

WHAT ABOUT THE POLITICIANS?

We know for a fact that there is no interest from the current government in doing anything about drought proofing the country. Quite frankly, it seems that Regional Australia, the people who feed us and generate billions of dollars in export earnings, are being ignored.

Come to think of it, Australia’s agriculture industry is only second to the mining giants in the security they provide us all.

I got into a dialogue with the Honourable Michael McCormick MP, who was at one stage Deputy Prime Minister back in 2019. He is a great man with good intentions, based on the southern Riverina of NSW where he ought to be very much aware of the need for water security.

He suggested providing $3.3 bn in funding through the National Water Infrastructure Development Fund and that a $2 m in a national infrastructure loan facility would solve the problem. That was back in 2019. Here we are six years later, and we still see farmers having to fight for water, with one politician making the comment that “dams don’t make it rain”. That was the famous Daniel Andrews, the former Premier of Victoria.

WHAT’S THE PROBLEM?

To a simple man like me, the drought proofing of Australia, is the number one project that should be facing every government in the country. Is it a lack of co-operation from the State and Federal government? The Queensland government held up the Fitzroy River Dam (Rockwood Weir) for years, finding every excuse they could to do nothing about providing water security to Rockhampton from floods, as well as providing water security for farmers.

Since then, we’ve seen Townsville flood with half a million cattle drowned.

I also had some dialogue with Barnaby Joyce at one stage who pointed out that a dam on the Fitzroy would provide 2,000 jobs and $100 bn extra income for the country per annum, just by building that one big dam. They did start it but the original majestic size of the dam was reduced.

POPULATION GROWTH REALITY

Our major cities are growing fast, with housing shortages and prices going through the roof. Here we are in an island continent that doesn’t have the vision to invest in its own future.

Yes, the Rookwood Dam should have been built to the right size. The Dungowan Dam in New England plus other key projects valued at millions of dollars should have been built. Anybody wants to argue this should try “dry land” farming in Condobolin or other similar regions in Australia.

FINDING THE SOLUTION

That’s easy. It’s all about the political will. Our American friends built the Hoover Dam in three years. That was a guy called Henry Keiser, his company was part of Six Companies, Inc. Without the Hoover, there wouldn’t be a Los Angeles. 

John Bradfield, the brilliant Australian who designed and built the Harbour Bridge in Sydney, came up with a scheme back in the early 1930s on how to drought proof the country with dams and channels. We even proved it with the Murrumbidgee Irrigation Project (MIA). You’ve only got to drive through the country of southern NSW to see how water changes the population and its wealth. The MIA, Griffith and Leeton, is a classic example of the results of the courage of change from the cards that have been dealt by nature.

The earthmoving industry would look at a project like the building of these dams and channels as being just another challenge with their D10 Dozers and excavators. Farmers would applaud and, when you think about the way our taxes are spent, it’s a better investment than anything else they seem to be able to think of, apart from defending the nation.

ASK A BABYLONION

Hammurabi, the King of Babylon around 1750 BC, quoted this on one of his stela monuments: “The Gods have ordained that I should govern the peoples of Sumer and Akkad and fill my hands with the tributes they have paid to me. I built the Hammurabi Canal which is such a boon to the habitants of Chaldea. I have sent the branches of the Canal across the barren plains to the desert, to provide for the peoples of Sumer and Akkad with unending supplies of water. I have made the desert bloom with the happiness of all who live there”.

Boy, if I could raise that man from the dead, what a job he would do in Canberra! 

South Sudan is inundated every year when the equatorial monsoon hit.  Aussie Pumps is there. Image supplied.
South Sudan is inundated every year when the equatorial monsoon hit.  Aussie Pumps is there. Image supplied.

Aussie Pumps works hard on this project and will never give up until action comes to fruition. In the meantime, people in countries like South Sudan, where Aussie Pumps are given great credit for being able to save people from floods and droughts, show us what is possible.

The opportunity to participate in supporting the United Nations in South Sudan started two years ago. The difference is that in 2025 we changed designs of our big 6-inch pumps, made them more user-friendly and supplied more of them to the United Nations in Juba, the Capital of South Sudan.

With more than 20 of our 6” diesel drive trash pumps changing the direction of the Nile River, pumping 6,000 litres per minute each, we are providing great support to the people who need all the help they can get.

We ask the readers of PEA the question, “When will Australia wake up to the potential of this wonderful gift of a country?”

Further information on drought proofing Australia, including papers written by Warwick are available from Australian Pump Industries at www.aussiepumps.com.au

Don’t fall for “Corporate-itis” …

Don’t fall for “Corporate-itis” …

Some of the Aussie staff members demanding change!
Warwick Lorenz

…says Warwick Lorenz, Managing Director of Australian Pump Industries as he reflects on his decades of experience in the machinery business, his love for the power equipment industry and Australian-built products that are shipped across the world.

After the above introduction, I should explain how I caught “corporate-itis”. I’ve only had two jobs in my life. One was at Tutt Bryant where I spent 27 years with the biggest machinery business in Australia. When I joined it, there were 8000 people, and we built everything from hydraulic cylinders and valves at Australian Hydraulics to Pacific Pump who made deep well pumps.

Pacific wasn’t a big company and it was a relatively unimportant part of the Tutt Bryant empire. It was my first shot at running a company. The failure of the company was a failure of management. They had not recognised the quality of the people who worked there and the value of the pump engineering that was being carried out.

The treasure was in the people working in the factory, some of them 35 year men who built terrific products and were proud of what they did. My first step was to clean out the sales department and rebuild the business.

After decades of working with the group I found myself part of the corporation. The mighty founders of Tutt Bryant – George Bryant and Leo Tutt Senior died and the company was sold-off. 

I thought George and Leo were immortal! It was a great lesson.

My second job was at Australian Pump.

Having retired to become a beef cattle farmer I changed my mind and realised that all I needed was an 18-month holiday. I was ready to go back to work but, I had experienced the corporatisation of Tutt Bryant. 

We worked for a board of directors in London for Bowater. The Managing Director was an ex-Guards officer and an ex-SAS man and the finance gentleman was also exceptional. They travelled the world, holding meetings and strategic reviews on about 50 companies. They were good guys. Back then, Managing Director, David Lyons said to me, “It’s a shame you’re leaving young man, you were just beginning to understand”. 

The answer is I didn’t want to understand. I didn’t want to be a corporate person; I didn’t want to fill in projections and reports to London every week/month. I wanted to work with people, and I wanted to do something constructive.

THE BIRTH OF AUSSIE PUMPS 

We started in a shed in my backyard! There were 4 of us, my wife, my son and an engineer friend and I.

We did everything. That included painting the inside of the office, a mezzanine that stretched the whole length of the 50m long building.

Soon we began to realise that there was a real opportunity for development of high pressure fire pumps that would provide improved performance over those products that were already on the market and, which could be matched to Honda engines as a perfect combination.

Yes, we did have some help by using a 3” inch high flow pump as a beginning and turning it into what became to be regarded as the worlds best lightweight portable fire pump.

WHAT HAPPENED TO THE OTHERS?

That is a good question. Davey Pumps were corporatised after the founder passed on. He was a gentleman. I met him a couple of times at Pump Manufacturers Association meetings and was impressed by his completely unpretentious approach and his serious desire to just build better products.

Of course, since then we’ve seen third world copies of some of those Davey pumps flood the market. They were good pumps in their time but outdated by today’s standards.

Whatever happened to Victa Mowers? Having been shoved onto Briggs and Straton, they were eventually acquired by GUD, the same company that bought Davey, with the same eventual result. Davey is now in the hands of a very competent Chinese/Malaysian gentleman. I haven’t met him, but I would like to.

He bought it as a fire sale from GUD for a reported $58million. Imagine that! $58M for what had been a really great company!

What ever happened to Advanced Power, leading genset manufacturers and Power Lite, now owned by an Italian company (we understand) and so it goes. 

Yes, Australian Pump gets approached by corporations on a regular basis. We are not interested. They don’t understand that we are not in it for the money.

You may think that sounds ridiculous and it does seem a bit absurd, but we are slightly less than 60 people who are fanatical about important things. Yes, we want to save the world from bushfires. That’s why we build the world’s best lightweight portable fire pumps. 

We want to save people from floods. That’s why we developed the big 6-inch heavy duty MQ600 6,000 litre per minute pump. Councils can have their own portable flood mitigation program instead of having to wait for state and federal governments to do something about floods and for that matter, water preservation.

WE FIGHT DROUGHT 

The mighty Aussie Pumps started in a backyard shed and now operates out of a 3 acre factory.

We know that in a drought farmers don’t have any money, so dealers and PEA type shops don’t have too much business. Everybody is lean.

In the last big drought, (six years long), we gave our best dealers 90-day credit terms. We did that so they could give their customers those terms. Those poor farmers who are out there shooting their sheep, burying dead cattle and breaking their hearts needed to get water from somewhere and you can’t get water without pumps. 

The result? Not one of our dealers welshed on the deal. They all paid by the end of the 90 days and although we expected some to falter, they all paid up and appreciated the gesture we’d made.

To my knowledge no other pump company gave 90-day terms as drought relief on their products and neither did any of the other pump people. It was only Aussie Pumps who did that. 

TALKING ABOUT R&D 

Why corporations want to buy Aussie pumps is because we are a dynamite company with a great team. We develop products that nobody else can do or has done. 

We don’t think about a bunch of shareholders and their dividends. 

What we’re thinking about is the guy in the paddock, the plumber trying to clear a blocked drain, the farmer whose cattle are dying from a lack of food and water or, for that matter, even the towns on the north coast of New South Wales or Queensland. They flood repeatedly every time there is a massive storm, to the complete surprise of their local government bodies. What can we say? 

OUR STAFF IS REVOLTING 

Yes, our staff are revolting! They are angry, they are fed up as they can’t understand why the state and federal government haven’t done anything about drought proofing Australia.

They know it’s possible just like we all do. All it takes is money and that wonderful decider – the will to get it done.

If you want to know more about this, there is a plan afoot to bring in the Burdekin watershed down through Western New South Wales, South Australia and Western Victoria to solve the perennial problems of the ‘dry’. Do we support it? Absolutely. Would we help finance it? I’d buy shares in a heartbeat!

If the government is too lazy to fund it after all the other money they waste, wouldn’t it be great to see those channels bring that water down to farmers so they can have water security instead of living on the edge, waiting for the next drought.

No doubt you’ve all heard the farmers say when a drought is on, ‘every day brings us one day closer to rain’.

What courage those people have and what staying power, only to see their plight completely ignored by the government and not revolt. Imagine what we could do with water security right through Australia, but that takes imagination and more than a three-year term in parliament. 

For more information on regional water security, contact wlorenz@nullaussiepumps.com.au or visit aussiepumps.com.au

Rehlko Engines: Built for Australian conditions

Rehlko Engines: Built for Australian conditions

From zero-turn mowers for metropolitan parks to slashers for rural properties and stump grinders for commercial job sites, Rehlko engines power up equipment across the Australian landscape.

With Spring approaching, Australia’s landscapes are transforming fast – and so is the workload for contractors, landowners, and local councils. To support the seasonal surge in vegetation management, EPG Engines suggests its flagship brand, Rehlko Engines (formerly Kohler Engines), which is purpose-built to handle Australia’s toughest garden and land care conditions.

As spring maintenance peaks, EPG Engines recommends an upgrade or repower with Rehlko engines, ensuring performance, fuel efficiency, and reliable uptime when it matters most.

“Spring is the busiest season for our customers, mowers are running non-stop, slashers are clearing paddocks, and sprayers are out in orchards,” said Tim McCarthy, CEO at EPG Engines. “Rehlko provides the horsepower and durability to keep going without interruption.”

Why Spring Is a Power Season

Spring marks a turning point in garden and land management. As temperatures rise and rainfall increases, vegetation explodes. Lawns thicken, shrubs overgrow, weeds spread fast, and fire-prone material accumulates. This growth drives a sharp increase in equipment use.

Some of Spring’s key jobs include:

  • Lawn mowing and turf care on residential, commercial, and council grounds
  • Slashing large acreage and roadside verges
  • Clearing undergrowth in bushfire-prone zones
  • Tilling, planting, and mulching in garden beds
  • Grinding stumps and processing debris
  • Spraying for pests and weeds across orchards and vineyards

In all applications, engine-powered equipment must perform reliably, often under continuous load, across large areas, and in varying terrain. Engine failures not only delay work, but they also cost contractors money – and clients.

Built for Australian Conditions

Rehlko Engines are engineered to excel in the harsh and variable conditions unique to Australia. From high temperatures and airborne dust to irregular terrain and long operating hours, Rehlko’s engines are manufactured with features that keep machines working hard, day after day.

Key engine features include:

  • Cast-iron cylinder liners for long service life
  • Cyclonic air filtration to protect internal components in dusty conditions
  • Hydraulic valve lifters that minimise maintenance
  • EFI technology for improved fuel efficiency and reduced emissions
  • Quiet, low-vibration operation for operator comfort

Rehlko’s extensive engine range is available through EPG’s nationwide dealer network and supports OEMs across Australia’s critical industries, such as commercial landscaping, agriculture, viticulture, council works, and many more.

Spring Applications: Where Rehlko Engines Shine

Here’s how Rehlko engines power up Australia’s spring season across key applications:

1. Zero-Turn and Ride-On Mowers

Spring means rapid grass growth, and that means mowers need to cover more ground, more often. Rehlko Command PRO® V-Twin engines (such as the CH730, CH740, and EFI-equipped ECH749) are found in leading commercial zero-turns.

Why they excel:

  • High torque output enables clean cuts through thick, wet spring grass.
  • Cyclonic air filtration prevents clogging from pollen, seed heads, and dust.
  • Electric fuel injection (EFI) models offer faster throttle response and lower fuel usage, perfect for big mowing days.

These engines power brands like Cub Cadet, Hustler, Toro, and more, making them a first choice for contractors and councils.

2. Slashers and Brushcutters

Rural and regional properties face rapid weed and grass growth in spring, and landowners must act fast, especially before fire bans come into effect. Rehlko’s horizontal-shaft engines are suited to slashers and brushcutters in tough Australian terrain.

Best suited for:

  • Acreage maintenance
  • Roadside clearing
  • Bush block management

With strong torque curves and reinforced components, Rehlko engines can power through stringy bark, blackberry, and dense scrub with ease.

3. Stump Grinders and Chipper Shredders

Spring is prime time for property cleanups, and stump removal and mulching debris are essential for safe, clean, and usable outdoor spaces.

The Kohler Command PRO® 25–38 hp range provides ample torque and impact resistance for stump grinders and chippers from brands like Red Roo and Vermeer.

Benefits include:

  • Reinforced crankcases that withstand vibration.
  • Optimised cooling for long-duration grinding.
  • Remote throttle control compatibility.

For contractors, these machines must run hard and often. Kohler engines make sure they do.

4. Sprayers and Boom Systems

Kohler’s small horizontal and vertical shaft engines also power agricultural and landscaping sprayers. They’re ideal for:

  • Weed spraying in paddocks and orchards
  • Garden fertiliser application
  • High-pressure firefighting pump units

Engines like the Kohler SH265 and CH440 offer pull-start or electric options and pair seamlessly with most Australian pump and sprayer brands.

5. Water and Fire Pumps

Spring also marks the start of bushfire preparation season. Rehlko engines power a wide range of water pumps, from tank-to-trough farm setups to emergency-use firefighting kits.

Their reliability and ease of service make them popular among:

  • Rural fire brigades
  • CFA volunteers
  • Station owners and graziers

With electric and recoil start options, Rehlko’s pump engines are a critical tool in rural resilience.

National Support, Local Expertise

EPG Engines backs every Rehlko unit with a comprehensive network of trained dealers, local spare parts supply, and technical support.

Key benefits include:

  • Fast delivery of engines and parts from Australian warehouses
  • Dedicated engineering support for OEMs and fleet users
  • Ongoing training for dealers and service centres

“A Rehlko unit is more than just an engine; it’s a full-service power solution supported by a team that understands the land care and power equipment industry,” added Mr McCarthy.

Your Spring Starts with EPG Engines

When the grass grows fast, brush gets thick, and land demands attention, Australians trust equipment powered by Rehlko (formerly Kohler) and backed by EPG Engines. From councils to contractors, landscapers to lifestyle property owners, we’re here to deliver more than horsepower. We deliver confidence, uptime, and local support when it counts most.

For the full range of Rehlko (formerly Kohler) engines and spring-ready solutions, visit epgengines.com.au or speak to your nearest authorised dealer.

Time to spring into action!

Time to spring into action!

As winter fades and the vibrant energy of spring begins to bloom, it’s the perfect time to rejuvenate your garden. The experts at STIHL share how you can do it in an energy-efficient way.

It’s time to embrace sustainable practices that will benefit both your outdoor space and the environment. This season, STIHL Australia is leading the charge with a suite of AK Battery-powered tools designed to make garden care easier, smarter, and more energy-efficient.

Whether you’re a seasoned gardener or just starting out, STIHL’s AK Battery system offers a powerful, lightweight, and eco-conscious solution for all your spring garden needs. 

From lawn care to pruning, edging, and cleaning, these tools are built to reduce your total energy consumption—both physical and electrical—while promoting a thriving garden ecosystem.

Why Choose STIHL’s AK Battery System?

The AK Battery system is STIHL’s answer to modern garden care: quiet, cordless, and clean. With interchangeable batteries across a wide range of tools, users enjoy seamless transitions between tasks without the hassle of cords or fuel. These tools are designed to be lightweight and ergonomic, reducing physical strain and making garden maintenance more accessible for all ages and skill levels.

Beyond convenience, the AK system is a leader in energy efficiency. Compared to petrol-powered tools, AK Battery tools consume significantly less energy and produce zero direct emissions, helping reduce your carbon footprint while maintaining high performance.

Spring Lawn Rejuvenation with the RLA 240 Scarifier

One of the most important spring tasks is lawn rejuvenation, and the RLA 240 Scarifier is the perfect tool to kickstart this process. Designed to remove thatch, moss, and compacted soil, the RLA 240 helps your lawn breathe and absorb nutrients more effectively.

Best time to scarify? Early to mid-September is ideal, when soil temperatures begin to rise and grass growth resumes. Scarifying at this time encourages healthy root development and prepares your lawn for the warmer months ahead.

The RLA 240 runs on the AK Battery system, making it quite enough for suburban use and powerful enough to tackle medium-sized lawns with ease. Its adjustable working depth and dual-functionality (scarifying and dethatching) make it a versatile addition to your spring toolkit.

Versatility in Action: KMA 80 R Kombi System

Spring brings a variety of garden tasks, and the KMA 80 R Kombi System is your all-in-one solution. Powered by the AK Battery, this modular tool allows you to switch between attachments effortlessly, saving time, space, and energy.

Here’s how each attachment helps optimise your garden’s health:

 RG-KM Rotary Cutting Head: Ideal for trimming around delicate areas like flower beds and tree bases without damaging surrounding plants.

FCS-KM Lawn Edger: Creates crisp, clean edges along paths and garden beds, enhancing the overall appearance and health of your lawn.

FS-KM Line Trimmer: Perfect for general grass trimming and maintenance, especially in hard-to-reach areas.

HL-KM Hedge Trimmer: Tackles overgrown hedges with precision, promoting healthy regrowth and shaping.

HT-KM Pole Pruner: Reaches high branches safely and efficiently, ideal for spring pruning to encourage new growth.

BF-KM Cultivator: Loosens soil in garden beds, improving aeration and preparing the ground for planting.

BG-KM Blower: Cleans up leaves, debris, and grass clippings, leaving your garden tidy and ready for spring enjoyment.

The KMA 80 R’s compatibility with these attachments makes it a versatile powerhouse, reducing the need for multiple standalone tools and streamlining your garden care routine.

Eco-Friendly Cleaning with the REA 60 PLUS

Once your garden is trimmed, edged, and pruned, it’s time for the final touch: cleaning up. The REA 60 PLUS is STIHL’s portable pressure cleaner, also powered by the AK Battery system. It’s designed for outdoor applications like patios, garden furniture, tools, and even vehicles.

What sets the REA 60 PLUS apart is its ability to use gray water, making it a truly eco-conscious cleaning solution. By repurposing water from baths, sinks, or rainwater tanks, you can reduce your environmental impact while keeping your outdoor spaces spotless.

Its compact design and cordless operation make it perfect for spring cleaning tasks around the home, and its compatibility with STIHL’s AK Battery ensures you’re using energy efficiently across your entire tool suite.

Small Jobs, Big Impact: Promoting Garden Ecosystems

Spring is not just about aesthetics—it’s about nurturing life. Small tasks like pruning, edging, and soil cultivation play a vital role in promoting a healthy garden ecosystem. These actions improve airflow, sunlight penetration, and nutrient absorption, creating a thriving environment for plants, insects, and wildlife.

Using STIHL’s AK Battery tools for these jobs means you’re not only caring for your garden but also contributing to a greener planet. With reduced noise, zero emissions, and lower energy consumption, these tools support biodiversity and sustainable living.

Bonus Tools for Spring Efficiency

STIHL’s spring lineup also includes innovative tools to help you finish the job with ease and efficiency:

STIHL GHE Shredder Range: After pruning, turn branches and garden waste into nutrient-rich mulch or reduce volume for green waste disposal. These shredders are a smart way to recycle organic material and support soil health.

SHA 56 Battery Vacuum Shredder: Using the same AK Battery, this tool vacuums leaf litter and debris from driveways, paths, and garden beds, keeping your outdoor areas clean and tidy with minimal effort.

STIHL AK RMA Mower Range: Whether you have a compact townhouse lawn or a larger sloped backyard, there’s a mower to suit your needs. The RMA 235 is a lightweight polymer deck mower perfect for smaller spaces, while the RMA 460V offers a self-propelled steel deck design for tougher terrain and larger areas.

These tools round out STIHL’s AK Battery ecosystem, offering energy-efficient solutions for every corner of your home and garden.

Kress: Rewriting the Future of Turf Management

Kress: Rewriting the Future of Turf Management

With advanced battery-powered commercial-grade tools and autonomous robotic mowers, Kress is changing how professionals manage turf, landscapes, and green spaces across the country

As sustainable green space maintenance evolves, Kress Commercial outdoor power equipment (OPE) and Kress RTKn robotic mowers aren’t just keeping pace—they’re setting the standard. 

The Kress Commercial Advantage

The shift from fossil-fuelled equipment is accelerating, driven by expanding environmental regulations, noise restrictions, and a growing awareness of health risks linked to traditional landscaping tools. Kress leads this transition with battery-powered solutions that deliver the performance professionals expect, without the emissions, noise, or vibration of petrol engines.

At the core of this innovation is the Kress Commercial CyberSystem—a high-performance battery platform built for demanding landscaping work. It powers a full suite of 60V tools, offering petrol-equivalent output with the benefits of clean, quiet battery technology.

Downtime is a key concern with battery-powered tools. The CyberSystem addresses this with ultra-fast charging. Paired with the CyberTank, Kress CyberPack batteries (KAC804 and KAC810) can reach full charge in just 8 minutes when using boost mode. For on-site charging, the CyberPlug AC-DC Charger provides high-speed charging via mains power, while the CyberTank Lite DC-DC Charger offers flexible off-grid charging via CyberCapsules—compact 1.5 kWh energy modules. 

All Kress Commercial batteries are built for demanding use, with IPX-rated durability, transportable design, and smart diagnostics via the Kress App. The KAC804 and KAC810 batteries come with a market-leading warranty of up to 8 years or 3,000 charge cycles*, helping teams work smarter, longer, and more sustainably.

Designed for Australian conditions, Kress tools deliver reliable performance in extreme environments—from torrential rains and summer heat, to coastal salt spray and inland dust. Sealed electronics and rugged construction ensure year-round durability, while high-output battery systems help reduce operating costs, improve safety, and lower carbon footprints.

Meeting Professional Turf Care Demands

Efficient Coverage Solutions: Kress’s self-propelled mowers address the core requirement of professional turf care: efficient, reliable cutting performance. The KC711.9 features a wide 51 cm cutting deck for maximum coverage, while the KC720.9’s 47 cm deck suits tighter spaces and detailed work. Both models utilise high-efficiency brushless motors delivering up to 3 kW of power and 11 Nm of torque, matching petrol performance from startup. 

They support mulching, bagging, and rear discharge options, with cutting heights adjustable from 20 to 80 mm. The LiftStream airflow system improves bagging efficiency by up to 33% compared to conventional designs, reducing emptying frequency on large sites. Auto-clutch engagement and differential transmission improve manoeuvrability around obstacles while reducing operator fatigue.

Versatile Maintenance Tools: The KC120.9 Multi-Tool offers modular functionality with interchangeable attachments for trimming, edging, and brush cutting. This versatility simplifies crew logistics and reduces equipment inventory, which is especially valuable for teams managing multiple sites and applications.

For precision work, the KC150.9 Edger and KC100.9 Grass Trimmer deliver clean lines along paths, garden beds, and sports field boundaries. Lightweight construction and low vibration help minimise fatigue during extended use, boosting productivity and safety.

The KC170.9 Brush Cutter provides the cutting power to tackle dense vegetation and invasive growth. Its heavy-duty blade and adjustable harness make it ideal for clearing around infrastructure, fence lines, and natural turf borders—especially in bushfire-prone zones where fuel load reduction is essential.

Debris Management: The KC500.9 Backpack Blower provides 35N of blowing force for effective leaf and debris removal without disturbing turf quality. Its quiet operation suits noise-sensitive urban environments such as streetscapes, schools and hospitals, while the ergonomic backpack design supports extended use with minimal strain.

For targeted clean-up work, the KC510.9 Handheld Blower delivers portable and compact power for smaller areas and hard-to-reach locations around playground equipment, garden beds, and architectural features.

Autonomous Innovation: RTKn Robotic Mowers

Building on proven battery technology, Kress RTKn robotic mowers represent the next step in professional turf care. These intelligent machines complement traditional crews by handling routine mowing tasks, freeing skilled staff to focus on specialised landscaping and other priority tasks.

Advanced Navigation Technology

Unlike traditional robotic mowers, Kress RTKn models use satellite-guided navigation for centimetre-level accuracy—no perimeter wires required. This wire-free system simplifies installation and eliminates ongoing wire maintenance—a significant advantage for complex or high-traffic sites. 

The satellite guidance system maintains precise navigation even under tree cover, where standard GPS often loses accuracy, ensuring consistent mowing across complex and varied terrain.

Intelligent Operation Features

RTKn mowers are equipped with smart technologies for efficient turf management. MAP technology optimises mowing paths, while OAS ensures safe navigation around obstacles. Multi-zone support allows one unit to manage separate areas, and TeamWork enables synchronised operation of multiple mowers for large-scale coverage.

Auto-levelling cutting discs maintain consistent height across uneven terrain, delivering professional results without manual adjustments.

Flexible Coverage Options

Kress RTKn robotic mowers are sized for turfed areas ranging from 1,000m² to 24,000m², making them ideal for various applications—from sports fields and public parks to large municipal green spaces. For expansive sites, multiple units can operate in synchronised formation using TeamWork technology to extend coverage and maintain consistent mowing schedules efficiently. 

RTKn mowers go beyond routine turf care, supporting broader land management strategies. In bushfire-prone regions, regular low-cut mowing helps reduce fuel loads around key infrastructure—supporting proactive fire prevention and safer land stewardship.

A Smarter, Greener Future

As environmental regulations tighten and the demand for sustainable practices grows, Kress is reshaping the landscaping industry. Their battery-powered tools and autonomous mowers give businesses the means to reduce emissions, lower operating costs, and meet compliance goals, without sacrificing performance. 

Councils and facility managers across Australia are adopting Kress solutions to modernise operations and meet sustainability targets. Quiet, low-emission tools promote healthier work environments and make it possible to work in noise-sensitive areas where traditional petrol equipment may be unsuitable, meaning less disruption to the client.

By reducing reliance on fossil fuels and automating routine tasks, Kress enables scalable, efficient operations across varied site applications. As the industry moves toward a more sustainable future, Kress continues to set the standard.

For more information, visit Kress.com or contact your local authorised Kress dealer to explore the full range.

* 8 Years (5+3 Years) or 2000 (+1000) charging cycles, whichever comes first. Warranty extension is subject to customer registration at Kress.com within 30 days of purchase.

Tractors, Tech & Turf: John Deere Goes Big for Horticulture

Tractors, Tech & Turf: John Deere Goes Big for Horticulture

JOHN Deere brought its largest ever display of machinery to the recently concluded Hort Connections with two all new lines along with specialty tractors designed for the horticulture sector, underscoring its commitment to the horticulture sector.

Visitors to Hort Connections at Brisbane’s Convention Centre saw the most powerful of John Deere’s brand-new range of 6M tractors, the 6M 250, parked alongside the 5130 ML tractor, designed specifically for orchard and vineyard producers, and the extra-high 5090 EH perfect for those vegetable growers needing extra clearance. Even the new Z370R Electric Z-Trak™ Zero Turn mower was on display.

John Deere Australia and New Zealand Marketing Manager for Small Ag and Turf, Erin Wagstaff, said it was about showing customers the breadth of the machine line-up and the customisation available to suit every operational need.

“Each year we try to bring something new to Hort Connections and this year we assembled our best line-up yet,” Ms Wagstaff said.

“From our versatile and popular workhorse, the 6M, to the painstakingly designed hort specialist, the 5ML, we really wanted to demonstrate how we value our horticulture customers and that we are working to find the right solution for their needs.”

The all-new 6M

The new 6M range features more speed, power and customisation to create the ideal mid-size utility tractor for the horticulture industry.

For the first time, four models are 200hp or above, and those wanting extra speed for transportation have the option of a 50kph transmission. Another attraction is the intelligent power management, providing a 14.9-kW (20-hp) boost for many typical operations that use rear power take-off in high-power applications or in transport. The sloped hood design delivers enhanced operator visibility, while the option of single or dual rear wheels or larger tyres brings improved traction and power to the ground. There is also a digital cornerpost display in the cabin, featuring integrated connectivity and scaleable precision technology.

The name and numbering conventions have been aligned with John Deere’s 6R, 7R, 8R and 9R tractors, which display the series separately from the rated engine horsepower, and the sleek styling of the 6Ms includes a new flag design and louver shape.

The vineyard and orchard specialist

For horticulture producers looking for additional technology and efficiency gains, John Deere’s 5ML, purpose-built for orchards and vineyards, is the pick of the bunch.

The 5ML also brings unprecedented power to John Deere’s orchard tractor offering with 105, 120 and 130-horsepower models available. With two front-axle configurations for working widths from 155cm (61 inches) and up to 180cm (71 inches), the 5ML carries premium features at a size suited to exacting applications.

The 5ML comes equipped with programmable LED lighting, a front hitch to ensure operators can use heavier implements such as almond harvesters, and a front PTO for added versatility. There is also the choice of an easy-to-use PowrQuad™ PLUS or Powr8™ transmission. A new Limb Lifter kit can be added to gently move away low hanging branches, reducing the potential for damage to the tree and tractor.

Clear high-value crops with ease

The 5EH perfectly combines operator comfort with functionality, offering 690mm of front axle crop clearance to pass over bedded crops with ease and dual SCVs standard.

It also features a powerful air-conditioning and heating system, sun-visors, and interior lighting to cater for any time of day, winter or summer. The rear window opens to 70 degrees for visibility when attaching implements.

For applications that require lower speeds the 5EH can be equipped with an optional creeper.

A quiet revolution

Battery-electric power has come to John Deere’s Zero Turn mower range with the introduction of the Z370R Electric ZTrak™ Residential Mower to Australia and New Zealand, offering less maintenance, easier operation and reduced noise.

The Z370R is powered by a 3.2kWh lithium-ion battery which unlike most other electric mowers on the market is fully sealed to IP66 (ingress protection) rating, shielding it from the elements like dust, dirt and water. It mows up to two acres on a single charge* (*Actual mowing area per charge will vary based on conditions and attachment usage), is available in 42-inch and 48-inch cutting decks, and the charger plugs into a standard power outlet.

“We’ve got a great range of machines on display but if you can’t make it to Hort Connections then head into your local dealer for more information and a demonstration,” Ms Wagstaff said.

Aussie’s ‘flood busters’ at work in South Sudan

Aussie’s ‘flood busters’ at work in South Sudan 

Aussie Pumps’ chief engineer, John Hales highlights the work done by his company in providing a mobile flood solution to the east African country.

If we told you that an Australian builder of big 6” trash pumps with 80 hp diesel engines is currently saving Juba in South Sudan for the fourth year in a row from flood waters of the Nile, you would perhaps say – how come?

It’s a long story but it all starts with the focus of Australian Pump on the development of rugged 6” pumps that can move up to 6,000 litres per minute of flood water.

Councils love them because they can even be used for sewage bypass in the event of a flood. Nobody likes excrement floating down the streets, contaminating and generating a horrific odour. These pumps are a unique, super heavy-duty product that has virtually minimal moving parts.

We start out with the pump body itself. It’s a huge lump of iron! In the huge body, we put a big heavy-duty, high SG cast iron impeller with the ability to pass 3” spherical solids in suspension. After that, knowing the rough duty these pumps are going to get, we built in a titanium tungsten carbide mechanical seal, oil bath, designed to last years (if not run dry).

Then we moved to a front opening port that enables the pump to be cleaned out in the event of a choke. It takes a matter of minutes to open the port that enables full vision of the impeller. It can then be cleaned out with a pressure cleaner and is built to be tough.

From there, we matched it to an air-cooled, heavy-duty Deutz 80 hp diesel engine, claimed to be proven by Rommel in the deserts of Libya. There are no radiators, just this big engine built to Germany’s highest standards, designed for a long, trouble-free life.

We complete the picture with incredible capability. The pump does 6,000 litres per minute (360,000 litres an hour). It will move contaminated water with spherical solids to 3” with a 46 metre total head (65 psi) and a self-priming capability from 7.6 metres vertical lift.

Volutes are wear-resistant, heavy-duty cast iron and engine protection is provided by a Lofa low-oil pressure, oil temperature and V-belt failure shutdown.

To top it off, it has a 152 litre fuel tank built into the base that allows the pump to run for 11 hours without refuelling.

It’s a flood mitigation hero and has proven itself with local government bodies in Australia such as the Winton Shire Council. 

The picture shows pumps for the Council loaded up and ready to go. They put four of these big monsters, with heavy duty trailers into a flood protection system that is making local, and state governments take notice.

With those pumps, the council can move 24,000 litres per minute of contaminated water. They are mounted on super heavy-duty hot dipped galvanised trailers, fitted with tandem axles that look like they were designed for the Australian Army.

We are proud of these machines and the work they do. Saving the capital of South Sudan from flooding is a big thing for us. We could do the same thing in Australia but the State Emergency Services operations need to realise there is real Australian support right here in the country that can provide these trailer-mounted machines as a mobile flood solution.

For further information on Aussie’s flood pumps for mitigation, call John Hales or email operations@nullaussiepumps.com.au. 

University of Melbourne’s System Garden

University of Melbourne’s system garden

Growing maintenance

Tim Uebergang was an illustrator and animator when he started working at The University of Melbourne between jobs. Now working as the curator of the 160 year old System Garden at the Parkville campus, Mr Uebergang spoke with Lauren Butler about the joys and challenges of maintaining the 160 year old garden, and the outdoor power equipment assisting operations.

The University of Melbourne’s historic System Garden was constructed in 1856 and inspired by Cambridge University’s own systematic beds. Tim Uebergang has worked at The University of Melbourne for 13 years, with 10 of those years dedicated to curation and maintenance of the System Garden. While he didn’t originally intend to work in horticulture and garden maintenance long-term, Mr Uebergang is now clearly passionate about and invested in the success of the garden.Tim in Glasshouse

“My background is as an illustrator and an animator, so I came to this industry between working on jobs in animation. I would have long periods off and so I went and worked for a friend who was a landscape gardener and I eventually took up some study in horticulture and got the job at The University of Melbourne. I was offered a lot of opportunities – I just grew from there,” he said.

The System Garden and its maintenance requirements are quite specific due to the fact that the garden includes an arrangement of plants which showcase the evolution of plants’.

“It’s an evolutionary narrative. It was neglected for about 20 years, and when I started I met the dean of the School of Botany. She told me I could pursue turning the System Garden into a teaching arena and study subjects in botany. I started with plant systematics and evolution and went from there.”

For Mr Uebergang, studying botany with the university was insightful, allowing him to see the garden’s requirements first-hand. Due to specific maintenance requirements, Mr Uebergang works full time assisted by a part time staff member one to two days a week. He said that staff employed by The University of Melbourne to work on the gardens are horticulturally trained or skilled, and that further maintenance work is currently contracted to Citywide.

“My job involves plant selection, garden design, managing contractors who come into the garden, maintaining plant inventories and general maintenance work. Beyond the System Garden I assist the general campus with planting design and developing maintenance strategies,” Mr Uebergang said.

 

Sharing the load

According to Mr Uebergang, jobs such as lawn mowing, hedging and cleaning of hard surfaces are largely completed by Citywide contractors and overseen by grounds staff. With 1.5 acres of System Garden to keep in pristine condition, he is appreciative of the contracted maintenance services.

“Citywide do all of the Parkville campus, which includes our System Garden. They do all the lawn maintenance, weed control, edging and general conditioning. If areas need returfing they do all that for us. They’ll pull weeds in paving, make sure doorways are clear – all the general purpose stuff. When I first started here we did all that ourselves, but contracting Citywide allows us to focus more on the professional horticultural work,” Mr Uebergang explained.

While a lot of maintenance is contracted, The University of Melbourne employees are fully equipped to complete any necessary maintenance themselves. Some of this is done on a regular basis, while other jobs arise as a result of storm damage or in the lead up to university events.

“At the moment, we do some hedge trimming ourselves and we do storm damage, tree removals and other small stuff. We use a lot of chainsaws, blowers and so on. Having fantastic power equipment, like well-maintained chainsaws, means that if there is storm damage, we can fix it. Last year we had an elm fall across a road way and that stopped a whole lot of trucks being able to deliver to the food court areas. We got the chainsaws out and pulled the tree apart,” Mr Uebergang said.

One size fits all

While the System Garden requires a range of equipment for its maintenance, Mr Uebergang said that one brand covers all the university’s small equipment needs.

“We only have Stihl equipment. We have five chainsaws that range from the smaller 020s to the larger ones which are the 066s. We have a few blowers, as well as a hedge trimmer – all that stuff is Stihl.”

With a Stihl dealer less than a block from The University of Melbourne’s Parkville campus, Mr Uebergang said that the quality of equipment and servicing, as well as the handy location, all play a part in the decision to opt for Stihl equipment.

“We buy equipment through the local Stihl store, but we also get all our stuff maintained there. We get all our chainsaws sharpened and serviced. That’s fantastic, because you’re not driving out of the city or anything, it’s really handy. They give us good deals on equipment if we ever need to buy it as well,” he said.

When it comes to larger equipment, the university uses John Deer Gators for a range of every day garden requirements.

“They’re one of our most used and most valuable pieces of equipment. We have two of them, and sometimes it’s a fight to get them in the morning. They’re fantastic because they’ll do so many things for us – we chose the Gators because they are quite a tough little vehicle and we do stuff like heavy rock work in them, or we might use them for mulching. They are good to get around in small areas – roadways, laneways, in between bollards and things like that,” Mr Uebergang said.

It’s not easy being green

With a number of protected trees, specific growing requirements and environmental considerations to take into account, maintenance of the System Garden is no easy task for Mr Uebergang and his team.

“There are an amazing amount of challenges. The whole grounds of the university are 165 years old, so we have a lot of really mature trees. When it comes to new buildings going up and old ones coming down – which seems to be every year – we have to manage the gardens and the grounds around these precincts and make sure that the correct protection is given,” he said.

With five trees at The University of Melbourne on the National Trust Heritage Register and up to 60 trees on Victoria’s Significant Tree Register, taking care whilst maintaining grounds around trees is especially important. Furthermore, the foot traffic around the university brings its own set of challenges.

“It is a challenge in a large space to make sure that it’s all kept in a good way. The University of Melbourne has seven campuses and Parkville is the biggest one. There are 45,000 students and over 8,000 staff, so it’s like a small city within a city really – there are all those public safety elements that you have to be aware of. Of those 45,000 students, 28 per cent are international students so we have to be aware of potential language barriers when we section off areas,” he said.

Seasons also produce trials, with maintenance altering in various conditions. Staff also have to be considerate of semester exams as well as peak periods and events throughout the year.

“Everything changes seasonally – seasonally as in the seasons, but seasonally in university terms as well. For instance, in August we have an open day. The lead up to open day is one of our busiest times because the campus is open to the broader public. We’re mulching and pruning, we like to have things that are flowering and so on. That can be a challenge.”

Hard work pays off

While curating and maintaining the System Garden is hard work, Mr Uebergang said that it is also rewarding, with great opportunities.

“I enjoy quite a lot about my job. I have had the opportunity to travel to Cambridge University about five years ago, and I did some research on their system garden because that inspired ours. I travelled to Columbia last year and presented at a conference,” he said.

More than anything, he enjoys keeping the garden looking and growing well for the benefit of others.

“I really enjoy introducing the public to the garden, inspiring kids and working with the academic community in a way that the garden can be useful for teaching. I just enjoy people enjoying the garden.”

The System Garden is open to the public from 9am -5pm and tours can be arranged by appointment. To see more amazing images of the garden go to www.instagram.com/system_garden/.